Quick Hits

Episode 1: Scope, Reconditioned Gear & Capacity Rules (702.1 – 702.4)

SLIDE 1 (HOOK / COVER) ⚡ NEC Quick Hit: Optional Standby Systems (Part 1 - Basics & Sizing) ⚡ 

Residential standby generators, farm backups, and commercial data centers—welcome to Article 702. Unlike emergency or legally required systems, optional standby covers non-mandated backup power. Let's break down the scope and sizing rules! 👇

SLIDE 2 (SCOPE & RECONDITIONED EQUIPMENT) What Does Article 702 Cover?

• Permanently Installed & Portable: Applies to permanently installed systems and portable alternate power supplies arranged for connection to premises wiring.

• The Reconditioned Ban: Just like Articles 700 and 701, reconditioned transfer switches shall not be installed under Section 702.3.

SLIDE 3 (CAPACITY AND SIZING METHODS) How Do We Size Optional Standby Systems?

• Manual Connection: The user selects the load, and the standby source must have adequate capacity for all equipment operated at one time.

• Automatic Connection: Must be capable of supplying the full automatically connected load, unless an approved Energy Management System (EMS) or Power Control System (PCS) is used to manage and shed loads.

SLIDE 4 (WRAP-UP) 💡 Apprentice Pro-Tip: 

For residential multi-mode inverter systems in one- and two-family dwellings, the system capacity must match the PCS control setting and handle the largest single piece of utilization equipment. If it overloads and shuts down, manual reset is required!

💬 Save this post for your next residential generator rough-in! 🔗 

More code breakdowns and study tools at www.JoshTheSparky.com

← View Chapter 7 Home

← Back To Article 701 Home

← Back To Quick Hits Home